Dorna Document

Dorna Document

  • GitHub
  • Dorna.ai

›Guides

Guides

  • Motion concepts
  • Auxiliary axes
  • Connect to the robot
  • Mounting
  • Joint limit
  • Setting joints
  • Installation of toolheads
  • Set tool length
  • Inputs and outputs
  • Upgrade process

Mounting

Install and operate the robot either on the ground or to the ceiling. The base of the robot has four through holes of size 8.4 which can be used with M8 screws. Make sure that the mounting surface is completely flat, firm and sturdy. base

Last updated on 7/12/2022
← PreviousJoint limit →
Dorna website →
Copyright © 2022 Dorna Robotics